Instruments
Special Bending Pliers
Double-headed plier designed to cinch back SS and NiTi wires in all quadrants Double head for easy access to right and left sides. Max .019x025 NiTi, .016x.022 SS
New design with beveled tips and long handle for secure placement of crimpable hooks and stops without wire distortion “Three prong effect”.
- Double-sided intraoral plier to apply quick step up or step down without removing the wire. - Max: .021 x .028 SS, TMA and Braided wire
- Double-sided intraoral plier to apply quick step up or step down without removing the wire. - Max: .021 x .028 SS, TMA and Braided wire
- This Plier was designed to adjust and make vertical loops made of wire sizes up to .050” SS. - Long handle with heavy head for superior performance
Perfect for making TPA and its activation. Creates double back and triple back bends in .030 and .036 lingual arch wires
- Ideal to create & manipulate loops with serrated tips for secure wire holding. - Four different loop heights
Use this lightweight wand to chill and instantly soften thermal NiTi arch wires. Simply fill the tube with water and place it in the freezer. Once frozen, you are ready to go.
Traditional plier to make omega stops in a few quick steps: 1- Put a mark on the wire where the distal part of the stop will end. 2- Hold the plier so the vertical part will be DOWN for a mandibular stop and UP for a maxillary stop. In Fig. 2, the plier is positioned to form a stop for the LR6. Place the mark on the bottom distal beak relative to the molar*; in this case on the lower right beak. 3- Squeeze the plier to form a nice U-shape loop. 4- Place the loop in the perpendicular slot of the plier and squeeze to the desired size, and... 5- The loop is ready. 6- Shows actual measurement of loop.
Apply buccal or lingual torque to any individual tooth. Max: .021x .028 SS or TMA
Apply buccal or lingual torque to any individual tooth. Max: .021x .028 SS or TMA
This unique plier is designed to form permanent V-Bends on both SS and NiTi wires!! V-bends act as a stop to prevent wires from shifting, and could be applied to make the wire shorter. Max: 19x25 SS & NiTi