Menu
Picture of Limber, Copper NiTi Broad Form Upper.016 - 27° - PK/10
Picture of Limber, Copper NiTi Broad Form Upper.016 - 27° - PK/10
Picture of Limber, Copper NiTi Broad Form Upper.016 - 27° - PK/10
SKU: 13-401-104

Limber, Copper NiTi Broad Form Upper.016 - 27° - PK/10

  • A true super elastic wire with thermoelastic shape memory.
  • Generates more consistent tooth movement as the wire is active longer in the optimal force range.
  • Offered in multiple transformation temperatures to provide the right wire for your unique case.
  • The higher the temperature transition (TTR), the lower the relative forces delivered by the wire.
  • The lighter forces exhibited by the copper-nickel titanium and its high flexibility, allow these wires to be engaged in
    cases with moderate to severe tooth to tooth misalignment.
  • Longer clinical activation promotes reduced chair time and greater durations between wire changes.
  • Independent testing has shown that the copper-nickel titanium wire demonstrates maximum unraveling of crowding
    over a period of time, when compared to nickel titanium and stainless steel.
  • The addition of copper has been known to increase corrosive resistance and control the hysteresis width.
  • Use 27°C Copper when higher force levels are needed.
  • Wires come with 2 stoppers.
Products specifications
Attribute nameAttribute value
MSDS04-13-0002 V 5.00 Copper Nickel Titanium Arch wires
Customers who bought this item also bought
Picture of Pactive Kit, Roth 022 w hooks on 3s,4s and 5s - Kit

Pactive Kit, Roth 022 w hooks on 3s,4s and 5s - Kit

0
Picture of 5 mg TrueBond LC adhesive (Light Cured) - Piece

5 mg TrueBond LC adhesive (Light Cured) - Piece

True-Bond LC represents a state-of-the art technology, offering the most desirable characteristics, from the point of view of versatility, ease of handling, esthetics and reliability. High light sensitivity of the material allows for the use of the adhesive, not only for bonding the translucent (plastic or ceramic) brackets, but also, light impermeable metal ones. Simple procedure relief from pressure results in reproducible bonding strength and allows for precise bracket placement
Picture of Regular Round Bondable Buttons - PK/10

Regular Round Bondable Buttons - PK/10

Round concave base for better adaptation Smooth edges for minimum tongue irritation One piece construction to minimize breakage
Picture of 3 ml TrueBond LC primer (Light Cured) - Piece

3 ml TrueBond LC primer (Light Cured) - Piece

0
Related products
Picture of Life Saver Bur - PK/5

Life Saver Bur - PK/5

- A special design to clean any excessive adhesive under the wings without damage the brackets. ( when used properly with light force) - May be used with SS and ceramic brackets. - Always use light force to remove the extra adhesive.
Picture of Stainless Steel Cheek Retractor - Pair

Stainless Steel Cheek Retractor - Pair

- Made of stainless steel wire can be used both sides Special for oral photography - Length ca.12cm - Double ended with large retractor on one side (4.2 cm) – small retractor on other side (3.00cm)
Picture of Infinity Expander 9 mm - Piece

Infinity Expander 9 mm - Piece

Surgical Skeletal Expander is an excellent alternative to traditional SARPE procedure for qualified patients. The unique incomplete-hole-design will provide enough support to hold the mini-implants, and in the same time allow an easy emergency removal of the mini implant. Must be used with L-mini Implant.
Copyright © 2024 IOS. All rights reserved.